The Water Jet Machining (WJM) process is an advanced, non-conventional machining process wherein a water jet is fired at the workpiece. The jet erodes the material of the workpiece and causes it to become shaped, i.e. jetting is a machining process that utilizes a water jet to remove material from a workpiece.

Water emerging from the nozzle has a pressure of 60,000 pounds per square inch or 4137 bar. This means that the pressure is over 4000 times greater than the normal atmospheric pressure (1 bar). Hard materials cannot be machined with simple water jet machining. It is only suitable for softer materials such as rubber, ABS, leather, wood, and plastics. 

In order to increase the machining capability of water jets, abrasive particles are mixed with the jet of water. With mixed abrasives, hard materials such as aluminum, steel, granite, and cast irons can be machined. 

WJM is similar to Ultrasonic machining and Abrasive jet machining in that the workpiece is machined mechanically. For precise and automated control, this machining process is paired with a CNC machine. 

When high-velocity jets of water strike a workpiece, they cause erosion of the workpiece material, which results in machining.

Simple water jet machines are almost like their abrasive counterparts in terms of construction and operation. In order to better understand the abrasive jet machine, let’s examine its construction and operation. 

Water is stored in the reservoir for use as a jet.

The pump will take water from the reservoir and transfer it to the intensifier. The pump creates pressure in the water from 1500 to 4000 bars. A 50 to 100 HP electric motor is used.

The water jet intensifier creates a high-pressure liquid jet is by increasing water jet pressure. This intensifier is connected to the accumulator. Water is taken in at low pressure and expelled at high pressure through an accumulator. The mechanism works by hydraulic reciprocation. 

Water is temporarily stored in the accumulator. Several control valves are connected to the accumulator. By keeping the flow of high-pressure water continuous, it eliminates pressure fluctuations.

The control valve controls both the amount and the pressure of water being passed. It directs the water to the flow regulator. Kinetic energy is then transferred from pressure energy to the flow regulator.

A flow regulator regulates the flow of water that reaches the control valve. By adjusting the flow regulator, water will be sent to the nozzle, where it will be transformed into high-velocity water.

The nozzle produces highly kinetic jets of water from high pressure. Since the nozzle’s area decreases at its end, this creates more kinetic energy. Finally, the water jet is directed at the workpiece.

A stream of water will flow from this orifice when water is directed by the nozzle.

It is necessary to use high pressure tubes to flow water under high pressure. Tubes typically range in size from 6 mm to 14 mm in diameter. The cutting head can also be moved with great flexibility.

Water is collected in the catcher or drain after the workpiece is cut. From here, the water may proceed for further purification or be recirculate.

Water jet machining can be used for the following purposes:

·       Machining thick steel sheets, aluminium sheets, etc.

·       Machining materials that are difficult to machine by conventional methods.

·       Water jet machining is capable of achieving high precision.

·       Machining does not require coolant.

·       It is possible to produce complex shapes and cuts.

·       An excellent surface finish can be achieved.

·       By washing machine parts with water, they are dust-free.

·       No harmful by-products are produced, making it environmentally friendly.

·       It is less expensive to operate than other non-traditional processes.

·       A negligible amount of heat is generated when water is used to machine the workpiece.

·       Water jet machining cannot be used for very thick materials.

·       When compared to traditional processes, it takes much more time.

Omnidex CN: Industrial Manufacturing Services

With more than 78 manufacturing processes , including metal casting, metal fabrication, precision CNC machining, plastic fabrication, metal finishing and more, etc.,  in addition to our 200+ sub-contractor partners, OmnidexCN is able to support every project or component production regardless of the development stage or mass production.

You can find out more about our diverse industrial manufacturing services and solutions by contacting us .

Interesting! But looking for a nugget of how the nuts were threaded was disappointed.

Exciting and will be a great enabler for any digital program...can you share when this will be available to trial?

Amazing! Three people downvoted a comment about reducing world poverty - are they in favour of it?

What with dropping the limits on banker's bonuses and reinstating fracking, it's like they are deliberately encouraging rebellion.

This post is about Fracking..there are many other options for renewables and storage, hydro etc, without a exploring for shale gas in the UK.