Gap Lathe Machine (LY6250B)
Max. Swing over bed: 500mm (20")
Max. Swing over cross slide: 325mm (13")
Center distance: 1000/1500/2000mm
Max swing over gap: 630mm (25")
Effective length of gap: 260mm (10 1/4")
Bed width: 330mm (13")
Spindle hole: 65mm (2 3/5")
Spindle nose: ISO-C6 or ISO-D6
Spindle taper: Metric 70mm
Spindle speeds (Number): 22-1800rpm (15 Steps)
Metric threads range (Kinds): 0.5-28mm (66 Kinds)
Inch threads range (Kinds): 1-56inch (66 Kinds)
Moudle threads range (Kinds): 0.5-3.5mm (33 Kinds)
Diametral threads range (Kinds): 8-56D. P (33 Kinds)
Longitudinal feeds range (Kinds): 0.072-4.038mm/rev (0.0027-0.15 inch/rev) (66 Kinds)
Cross feeds range (Kinds): 0.036-2.019mm/rev (0.00213-0.075 inch/rev) (66 Kinds)
Rapid travelling speed of carriage: 5m/min (16.4 ft/min)
Leadscrew size: Diameter Pitch: 35mm/6mm or 35mm/1/4"
Cross slide travel: 300mm (13")
Compound rest travel: 130mm (5")
Cross-section size of toolshank: 20 x 25mm (1X6/8inch)
Taper of tailstock sleeve: Morse No. 5
Diameter of tailstock sleeve: 75mm (23/5")
Travel of tailstock sleeve: 120mm (43/4")
Main drive motor: 5.5kw or 7.5kw
Coolant pump motor: 0.125kw
Rapid traverse motor: 0.12kw
Packing Size (L x W x H): 2420/2920/3460x1150x1800mm
Net weight/gross weight: 1600/2250kg 1830/2470kg 2070/2820kg

Standard accessories
1.3-jaw chuck(250mm)
2. Driving plate
3. Center¢ Er sleeve
4. Oil gun
5. Wrenches
6. Operation manual
1. Optional accessories:
2. Steady rest
3. Follow rest
4.4-jaw chuck 320mm
5. Face plate
6. Thread dial
7. Longitudinal automatic trip
8. Live center
9. Quick change toolpost
10. Taper copy ruler
Position longitudinal antomatic trip