shenyang lathe machine CA6280x3000mm gap bed lathe machine
-This lathe machine is suitable for internal and external turning ,tapering,and other rotating faces,metric, module and inch threads, as well as drilling and pull oil slot.
-width of bed is 400mm ,hardened,quenched,wear-resisting and ground guideway.
-lathe machine is easy to operate, rapid device for carriage,design with single hand wheel to operate
-Strength and rigidity of machine ,high effiency,suitable for heavy duty machining
| Specifications | CA6180 CA6180B CA6180C | CA6280 CA6280B CA6280C | |
| Max .Swing over bed | 800mm | ||
| Max .Swing over carriage | 540mm | ||
| Max .Swing in gap | -- | 1020mm | |
| Effective gap length | -- | 210mm | |
| Max .length of work piece | 750/1000/1500/2000/2200/3000mm | ||
| Width of bed | 400mm | ||
| Section of turning tool | 25×25mm | ||
| Spindle | Spindle speed | 10-1400rpm/16-1400rpm(24steps) | |
| Hole through spindle | 52mm ,(B: 80mm),[C: 105mm] | ||
| Spindle taper | (MT6)(Φ90 1:20)[Φ113:20] | ||
| Feed | No. of feed | (64 kinds)(for each) | |
| Range of metric threads | (1-192mm) (44 kinds) | ||
| Range of inch threads | (1-24tpi) (21kinds) | ||
| Range of module threads | 0.25-48 (module 39 kinds) | ||
| Range of diametral pitc threads | 1-96DP (37 kinds) | ||
| Tailstock | Max. tailstock spindle travel | 150mm | |
| Tailstock spindle diameter | 75mm | ||
| Taper of tailstock spindle center hole | (MT5) | ||
| Main motor | 7.5KW(10HP) | ||
-width of bed is 400mm ,hardened,quenched,wear-resisting and ground guideway.
-lathe machine is easy to operate, rapid device for carriage,design with single hand wheel to operate
-Strength and rigidity of machine ,high effiency,suitable for heavy duty machining